Futurelight PCC-250 Manual Del Usuario página 41

Lamp
- Main menu 1
♦ Press [ENTER] for 3 seconds to enter the main menu (display flashing).
♦ Press [UP] to select "LAMP".
- Lamp on/off
With this function you can switch the lamp on or off via the Control Board.
♦ Select "OPEN" by pressing [UP] button.
♦ Press [ENTER], the display shows"ON" or "OFF".
♦ Press [UP] to select "ON" if you wish to switch on the lamp or "OFF" if you wish to switch off the lamp.
♦ Press [ENTER] to confirm.
♦ Press [EXIT/DN] in order to return to the main menu.
- Lamp on/off via external controller
With this function you can switch the lamp on or off via an external controller.
♦ Select "ONLI" by pressing [UP] button.
♦ Press [ENTER], the display shows"ON" or "OFF".
♦ Press [UP] to select "ON" if you wish to enable this function or "OFF" if you don't.
♦ Press [ENTER] to confirm.
♦ Press [EXIT/DN] in order to return to the main menu.
- Delay lamp on
With this function you can delay the lamp ignition.
♦ Select "DELA" by pressing [UP] button.
♦ Press [ENTER] to confirm; the display shows "D-00". In this setting, the lamp will be ignited
immediately.
♦ Press [UP] to select the desired delay between "00" and "59" minutes. If you select "D-03" the lamp
will be ignited after 3 minutes.
♦ Press [ENTER] to confirm.
♦ Press [EXIT/DN] in order to return to the main menu.
- Main menu 2
♦ Press [ENTER] for 3 seconds to enter the main menu (display flashing).
♦ Press [UP] to select "SET".
rDIM
- Dimmer Reverse
With this function you can reverse the Dimmer from 100-0 % to 0-100 %.
♦ Select "RDIM" by pressing [UP] button.
♦ Press [ENTER], the display shows"ON" or "OFF".
♦ Press [UP] to select "ON" if you wish to enable this function or "OFF" if you don't.
♦ Press [ENTER] or [EXIT/DN] to exit.
Rest
- Reset
With this function you can Reset the device via the Control Board.
41/89 51840900_V_1_2.DOC