Publicidad
Idiomas disponibles
Idiomas disponibles
Setting mode (continued)
Meanings of items shown in setting mode
OUT>***
Output connector/format setting
Set the output connector and the type of upconversion.
CLK>***
Clock mode setting
DAC>***
D/A converter setting
Set the type of connected D/A converter.
LAYER>***
Priority playback area setting
Set which layer to use first for playback when a hybrid disc that
contains both Super Audio CD and CD layers is loaded.
DPaOFF>***
Automatic display darkening setting
APS>***
Automatic power saving setting
24
Output connector/format setting
OUT>***
Set the output connector and the type of upconversion.
By default, the setting is ESLINK.
ESLINK
The audio signal is output from the ES-LINK connector.
During CD playback, the signal is output after 8X upconversion in
48-bit format.
DUAL_8
Two XLR connectors are used to output left and right signals
separately.
CD playback is output after 8X upconversion.
DUAL_4
Two XLR connectors are used to output left and right signals
separately.
CD playback is output after 4X upconversion.
DUAL_2
Two XLR connectors are used to output left and right signals
separately.
CD playback is output after 2X upconversion.
XLR_4
The stereo signal is output from one XLR connector.
CD playback is output after 4X upconversion.
XLR_2
The stereo signal is output from one XLR connector.
CD playback is output after 2X upconversion.
XLR_1
The stereo signal is output from one XLR connector.
Upconversion will not occur.
RCA_4
The stereo signal is output from one RCA connector.
CD playback is output after 4X upconversion. SACD audio cannot
be output this way.
RCA_2
The stereo signal is output from one RCA connector.
CD playback is output after 2X upconversion. SACD audio cannot
be output this way.
RCA_1
The stereo signal is output from one RCA connector.
Upconversion will not occur. SACD audio cannot be output this
way.
Publicidad
