Special Instructions - TECshow HALO 80 LED Manual De Usuario

10 Prism 1 Rotation
11 Prism 2
12 Prism 2 Rotation
13 Focus
14 7-Color Effect
15 Frost
16 Reset
17 Pan/Tilt Speed
18 Color Wheel
Speed
19 Dimmer-Prism-
Frost Speed
20 Gobo Wheel
Speed

4. SPECIAL INSTRUCTIONS

1. During the reset process, press and hold the 5
seconds "OK" button to interrupt the reset.
2. Press and hold the "OK" key during power-on
to interrupt the reset process and enter test
mode.
3. Set the DMX address to 512, return to the main
interface, press and hold the 10 seconds "OK"
P. 10
Tecshow Halo 80 LED -
English version
000-127
128-190
191-192
193-255
000-127
128-255
000-127
128-190
191-192
193-255
000-255
000-127
128-255
000-127
128-255
000-049
050-099
100-199
200-255
Extend Channel
000-255
4. Signal indicator:
Prism angle adjustment
Reverse rotation (from fast to slow)
Stop
Forward rotation (from slow to fast)
Prism 2 out
Prism 2 in
Prism angle adjustment
Reverse rotation (from fast to slow)
Stop
Forward rotation (from slow to fast)
Pattern definition from far to near
7-Color Effect out
7-Color Effect in
Frost out
Frost in
No Function
Small Motor Reset
Big Motor (Pan/Tilt) Reset
All Motor Reset
Speed from fast to slow
button to set the "display".Or "hidden" the
LOGO.
• The ERR red indicator flashes to indicate
that there is an error message and enters
the "System Information" -> System Error"
view information.