THOMSON 512376 Manual De Instrucciones página 41

1080P HD WIFI IP CAMERA
Recipient, etc.: Use this space to enter the
9
address(es) which will receive the alerts. In our
example: addressee@gmail.com
IMPORTANT: When you have finished configuration,
do not forget to click "Save" to save everything you
have entered.
Note: it does not matter who the email provider
of the recipient is, as it is the email provider of
the sender that dictates what needs to be entered.
However, you must ensure that the alerts are not
treated as spam by the recipient's inbox.
Note: some email providers will not accept that the
camera sends notifications without authorisation
from you. Refer to your mailbox safety settings for
more details.
Information: Our technical support will not be able
to help you with these settings if you contact them,
as it depends solely on your mailbox. For more
information, please contact your email account
provider.
When you have finished configuring your camera,
it will be able to send emails. You must now tell
it when to send them, by clicking "Détection de
mouvement [Movement detection]":
D - CONFIGURATION AND USE
1
Tick "Yes" to activate movement detection
then click "Sauvegarder [Save]" to display the
area grid on the image.
Sensitivity: On "élevée [high]", the smallest
2
movement on the screen triggers an alert.
On "minimum", only the biggest objects will
trigger an alert (for example: a human being,
but not a dead leaf in the camera's field of
vision). Adjust to suit the camera's field of
vision and the desired objective.
Trigger interval: pause between alerts if
3
www.thomsonsecurity.eu
movement is detected over an extended
period
Detection zone: The camera feed appears
4
behind a grid. If movement is detected in a
red box, an alert is triggered. If movement is
detected in a blank box, no alert is given. Click
boxes to activate them (red) or deactivate
them (blank), for example, so as not to focus
on a window and to prevent anything on the
outside from being unnecessarily triggered.
IMPORTANT: When you have finished configuration,
do not forget to click "Sauvegarder [Save]" at the
top of the screen to save everything you have
entered.
This completes the configuration. From now on, any
movement detected by the camera in the zones
and at the times you have specified will trigger an
email alert.
4
1 2 3
17
EN
EN