en
Operating the appliance
Operating the appliance
W Risk of injury
– Before fitting/removing attachment, wait
until the drive has come to a standstill
and pull out the mains plug.
– Do not reach into the feed tube. Always
use the stuffer to push food down the
hole.
X Fig. F
■ Stand the mincer on a clean, level work
surface.
■ Take power cord out of the cable
storage and pull out to the required
length.
■ Put the completely assembled mincer
attachment, inclined slightly to the right,
on the drive.
■ Turn mincer attachment upwards until it
engages.
■ Tighten threaded ring on the mincer
attachment.
■ Attach filling tray.
■ Insert pusher into filling opening.
■ Place a bowl or plate under the outlet
opening.
■ Insert the mains plug.
■ Switch appliance on with the On/Off
button.
■ Place the food to be processed in the
filling tray.
■ Only use the pusher when adding more
ingredients.
Application instructions:
If the food to be chopped up jams in the
worm gear: Use reverse button to remove
the blockage.
1. Switch appliance off with the On/Off
button.
2. Wait until the drive comes to a standstill.
3. Briefly press reverse button.
4. Wait until the drive comes to a standstill.
5. Switch appliance on with the On/Off
button.
16
After using the appliance:
■ Switch appliance off with the On/Off
button.
■ Remove mains plug.
■ Pull out the pusher.
■ Remove filling tray.
■ Remove the mincer attachment. Holding
down the release button, turn the
attachment to the right and remove.
■ Disassemble mincer attachment.
■ Clean all parts, see "Cleaning and
servicing".
Fruit press attachment
(some models)
Puréeing soft fruit, tomatoes, apples, pears
or rosehips. The selection of the filter insert
determines the content of fruit pulp in the
juice. Do not use for puréeing fruit that
contains pips the same size as the holes
in the filter insert of the purée attachment
(e.g. raspberries).
W Risk of injury
– Before fitting/removing attachment, wait
until the drive has come to a standstill
and pull out the mains plug.
– Do not reach into the feed tube. Always
use the stuffer to push food down the
hole.
Warning!
Do not process frozen fruit or vegetables.
Remove stones (cherries, plums, apricots,
etc.).
X Fig. G
■ Insert worm gear into the housing.
■ Insert filter insert into the filter holder.
Press in filter insert all the way.
■ Insert filter holder into threaded ring.
■ Screw on threaded ring with filter holder
clockwise. Lug on the filter holder
must be situated in the recess in the
housing. Do not tighten the threaded
ring too tight.
■ Screw pulp nozzle into the filter holder.
■ Attach outlet funnel to the filter holder
and engage.