Publicidad
3
Drill four pilot holes using a 1/8 in. (3 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2 ¾ in. (70 mm). Be
sure to drill into the center of the studs.
4
23/4 in. (70 mm)
1/8 in.
(3 mm)
Install wall plate
bolts only until they are pulled firmly against the wall plate.
CAUTION:
bolts
plate
on to the next step.
Go to STEP 3 on PAGE 12.
07
07
using four lag bolts
Avoid potential personal injury or property damage! All four lag
08
MUST BE firmly tightened to prevent unwanted movement of the wall
07
. Ensure the wall plate is securely fastened to the wall before continuing
09
08
08
and four washers
09
. Tighten the lag
9
Publicidad
