ChefLine CHPZ3P Manual De Instrucciones página 10

Operation
Temperature setting and control (EVCO)
The front panel of the thermostat
1. Compressor operation light
2. Defrosting light
3. Energy saving light
4. Stand-by light
5. Programming key (service agent only)
6. Machine On/Stand -by (keep pushed)
7. Manual defrost (keep pushed)
How to turn the machine in ON / STAND -BY status

Press and hold the

During the button hold the
How to unlock the keyboard (»Loc» message)

Push any button for more than 2s, «UnL» message will appear and the keyboard will be unlocked.
Note: For safety reasons the keyboard locks automatically after 30s of keys inactivity.
To execute any operation, please unlock the keyboard first.
How to see and modify the set point

Push and immediately release the

To change the set value push

To memorize the new set point value push the
Automatic defrost

The appliance will automatically run defrost cycles.
Note: The cycle starts from the time the appliance is initially powered up.
Manual Defrost:

Press and hold the DEFROST

The defrost cycle will start immediately and the Defrost
Note: Starting a manual defrost also resets the automatic defrost timer.
How to turn ON / OFF the light

Press and release the
Note: Light logo is present and active only for model with glass door.
GB
key for 4s, the machine will turn from ON to STAND -BY status and vice-versa.
LED will blink to show status changing.
key, the set point will be showed and starts blinking;
or arrows within 20s.
button for 3s;
key, the light will switch ON or OFF.
9
key again or wait 20s.
LED illuminates.