Tecno-gaz 2033CLS Instrucciones De Uso página 49

02
2.1 Safety Marking
2.2 Safety Devices
The following safety devices are installed:
1. Safety valve set at 2.4 bar 0/+10%
2. Electromagnetic lock to prevent the door from opening while the cycle is running
3. Resistance over temperature thermostats
2.3 Safety Notes
1. The manufacturer is liable for the marketed product in accordance with current
regulations. The manufacturer's liability will expire when operations are carried out on
the device, or a part of it, by unskilled personnel or using non-original spare parts.
2. There should be no potential risk of explosion and/or fire in the room where the
autoclave is installed.
3. The autoclave should be installed in a special well-ventilated room.
2.4 Disposal
Cod. 0Z00H0004
VOLTAGE
DISCONNECT
THE MAINS
SUPPLY
BEFORE
REMOVING
THIS COVER
Refer to annex
SAFETY
ENGLISH
HIGH
TEMPERATURE
EARTH
CONNECTION
7