Descargar Imprimir esta página

Pioneer SPH-DA360DAB Manual De Instalación página 4

Ocultar thumbs Ver también para SPH-DA360DAB:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 26
Speaker leads
White: Front left +
White/black: Front left –
Grey: Front right +
Grey/black: Front right –
Green: Rear left +
Green/black: Rear left –
Violet: Rear right +
Violet/black: Rear right –
ISO connector
In some vehicles, the ISO connector
may be divided into two. In this case, be
sure to connect to both connectors.
NOTES
• The position of the speed detection
circuit and the position of the handbrake
switch vary depending on the vehicle
model. For details, consult your
authorised Pioneer dealer or an
installation professional.
• The position of the handbrake switch
depends on the vehicle model. For
details, consult the vehicle Owner's
Manual or dealer.
4
En
Power amp (sold separately)
Important
The speaker leads are not used when this connection is in use.
Subwoofer output (SUBWOOFER OUT L/SUBWOOFER OUT R)
RCA cable (sold separately)
Power amp
Front output (FRONT OUT L/FRONT OUT R)
Rear output (REAR OUT L/REAR OUT R)
Yellow/black (MUTE)
If you use an equipment with Mute function, wire this lead to the Audio Mute lead on
that equipment. If not, keep the Audio Mute lead free of any connections.
Pre out cord
To pre out supply
To connector 1
System remote control
Connect to Blue/white cable.
Rear speaker
Front speaker
Subwoofer

Publicidad

loading