ARDES AR4P16 Folleto De Instrucciones página 17

"SWING" button (control panel and remote control)
Press this button to activate or deactivate the automatic swing function
of the device. When the swing function is active, the corresponding
indicator (7) lights up.
"TIMER" button (control panel and remote control)
Press the TIMER button when the device is working to program
automatic switch-off at an interval of between 1 to 24 hours from when it
is programmed. Every time the button is pressed, the interval increases
by one hour.
A few seconds after selecting the timer, the display (2) will show the room
temperature again.
When the timer function is activated, the indicator (6) lights up on the
control panel. To disable the timer function, press the timer button
repeatedly until the display shows "0 0".
"Temp" button (control panel and remote control)
Press one of these buttons to set the desired room temperature
(automatic function); the set temperature will flash on the display (2).
The set temperature will change from a minimum of 15°C to a maximum
of 40°C.
Once the desired temperature has been selected, the display (2) will
show the room temperature after a few seconds.
In automatic mode, the device will automatically regulate the heating
power based on the difference between the room temperature and the set
temperature. In this operating mode, the device will also switch between
the various power levels (ventilation, low power, high power) repeatedly.
The selected power level is always shown on indicator (8):
- minimum heating (blue);
- maximum heating (red);
- ventilation (white).
Once the set temperature has been reached, ventilation will still remain
active in order to monitor the room temperature more effectively.
To disable this function, press the "ON/OFF" or "HEAT" button and
manually select the desired function (low power or high power).
button (remote control)
- When the device is switched off, press this button to turn it on. The
device switches on in minimum heating mode.
The indicator light (8) will switch on in blue colour and the display (2)
shows the room temperature.
- When the device is switched on, press this button to turn it off.
Wait 15 seconds until the fan will stop.
17