Publicidad
Idiomas disponibles
Idiomas disponibles
16
www.electrolux.com
Wi-Fi module parameters
Max Power
Encryption
7.1 How to connect the
dishwasher to the network and
to the app
To connect your dishwasher, you need:
• Wireless network with the Internet
connection.
• Mobile device connected to the
wireless network.
1. Launch My Electrolux Kitchen app on
your mobile device and follow the
instructions in the app. When
prompted in the app, activate the
wireless connection in the
dishwasher.
2. To activate the wireless connection,
press and hold simultaneously
• The indicator
• The display shows On for a few
seconds and then AP.
• All buttons are inactive except for
the on/off button.
3. When prompted, enter the home
network credentials in My Electrolux
Kitchen app.
If the credentials are not
entered, the dishwasher
cancels the procedure after
some time and returns to the
programme selection.
If the connection is successful, the
indicator
letters AP are off. The appliance returns
to the programme selection. Refer to
"Daily use" to activate the remote start.
If the connection is
unsuccessful or the display
shows upd, refer to
"Troubleshooting".
8. BEFORE FIRST USE
1. Make sure that the current level of
the water softener agrees with the
<20 dBm
WPA, WPA2
for 2 seconds.
flashes.
is steady and the
If you want to cancel the procedure,
switch the appliance off and on.
7.2 How to deactivate the
wireless connection
Press and hold simultaneously
for 2 seconds.
• The indicator
• The display shows Off for a few
seconds.
• The appliance returns to the
programme selection.
7.3 How to activate the wireless
connection
Press and hold simultaneously
for 2 seconds.
• The indicator
• The display shows On for a few
seconds.
and
• The appliance returns to the
programme selection.
Refer to "Daily use" to activate the
remote start.
7.4 How to reset the network
credentials
If you want to connect to a different
wireless network or update the
credentials of the current network, reset
the network credentials.
Press and hold simultaneously
for about 5 seconds.
• The display shows Off and then
--- for a few seconds.
• The indicator
• The appliance returns to the
programme selection.
Connect the dishwasher to the network
and to the app to enter new network
credentials. Refer to the instructions
provided earlier in this chapter.
and
is off.
and
is on.
and
is off.
Publicidad
