NeuLog NUL-220 Guia Del Usuario página 19

Sensor offset
Prior to each use, the CO
roughly half an hour. For best results, plug the CO
sensor into a USB or battery module and allow it to sit for
half an hour before to collecting data.
Open air mode:
Although the NeuLog CO
calibrated, it is recommended to offset its probe.
The sensor offsets to the standard atmospheric CO
concentration of 380 ppm in open air (assuming stable
levels in the Earth's atmosphere at sea level).
Materials needed:
 NUL-220 CO
 One of the following (depending on the experiment
type):
USB-200 Module (For On-line experiments).

BAT-200 Battery Module (For Off-line experiments).

VIEW-101 Graphic Display Module and BAT-200

Battery Module (Optional, for use with NeuLog
Viewer).
V2018.01
19
sensor needs to warm up for
2
2
sensor
2
sensor does not need to be
Home
2
2
English