Publicidad
Idiomas disponibles
Idiomas disponibles
Videos and experiment examples
Videos, literature and other probes can be found at
www.neulog.com.
In order to access the CO
"Products" on the main menu and then "CO
sensor".
In order to access the CO
choose "Example Labs":
Photosynthesis (B-10)
Respiration of Germinating Seeds (B-11)
Technical background
The philosophy behind NeuLog's plug and play
technology is based on each sensor's ability to store its
own data due to an internal flash memory chip and
micro-controller in each plastic NeuLog body. This
technology allows the sensor to collect and then store
the digital data in the correct scientific units (for
o
example:
C,
The sensor is pre-calibrated at the factory. The built-in
software in the logger can be upgraded for free at any
time using the provided firmware update.
In spite of that, the probe needs to be offset prior to its
initial use. Please review the "Sensor offset" guide at the
beginning of this document for detailed instructions.
The CO
sensing element consists of a cation (Na
2
electrolyte formed between two electrodes together with
a printed heater (RuO
The cathode (sensing element) consists of lithium
carbonate and gold, while the anode (counter electrode)
is made of gold.
V2018.01
o
F, Lux, %, ppm).
) substrate.
2
22
sensor's page, choose
2
sensor's experiments,
2
Home
logger
2
+
) solid
English
Publicidad
