Publicidad
Idiomas disponibles
Idiomas disponibles
CARE AND MAINTENANCE
• The high pressure hose is stored on the hose hook
located on the back of the handle.
• Insert extension lance into nozzle tray, and press spray
gun with extension lance into spray gun holster.
• Make sure to discard any remaining detergent from
the foam cannon. Residual chemical will stick to the
container which could become contaminated and
can cause the foam cannon injector to clog and not
function properly. Flush the foam cannon and nozzles
with clear water to prevent clogging.
• The quick connect nozzles are stored on the nozzle
holder located on the spray gun.
• Put the rotary nozzle on the rotary nozzle holder, which
on the right of the power washer.
• Store the foam cannon on the back of the power
washer.
• Wind the power cord around the cord hooks located
on the back of the power washer.
PUMP SAVER
OPERATING INSTRUCTIONS
VER
Pump Saver is a product that protects and prolongs
the life of the pump. This will keep the internal parts
of the pump lubricated and protected from freezing
while being stored in ALL climates. It also assists with
protection from internal corrosion. The AR Blue Clean
part #is: PW64511(16oz. bottle). Order online at
www.arblueclean.com
Pump Saver Instructions
Follow the previous storage instructions for your power
To prevent staining, protect the surface under the
power washer from any excess fluid. wear ear and eye
protection when using this product.
Turn unit off and disconnect the gun before adding
pump saver. Unscrew threaded top from bottle to
remove seal and reattach threaded top to bottle.
Remove black cap from bottle.
1) Place top of pump saver bottle onto the garden
hose adapter.
2) Secure pump saver bottle by turning in a clockwise
direction.
• DO NOT store the power washer where it is
exposed to freezing temperatures unless you use
an antifreeze designed for pumps. Store the power
washer indoors to prevent the water in the unit from
expanding under freezing conditions. When the
water freezes and expands, your power washer will
be damaged and become inoperable. Or, if storing
outdoors, it is recommended you use pump saver (not
included) to protect pumps.
3) Turn the power on.
4) Squeeze bottle to help it into the pump.
5) Turn power off when pump saver exits the machine's
water outlet.
Note: Instructions on Pump Saver Bottle are generic and
not model specific.
15
Publicidad
