Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
6
K
N
1
Pull back on collar at one end of high pressure hose
(N).Push firmly to connect hose to spray gun (K). Twist
collar to secure. Confirm hose is locked into spray gun
by slightly pulling on them. The hose is now securely
attached to spray gun.
8
1
Unlocked
Locking Spray Gun (before Lance installation) To lock
trigger of spray gun (K), point gun away from you and
turn dial to lock ("3" and "9" position). Squeeze or pull
trigger to make sure it is locked. Always leave in locked
position when not in use. This ensures the gun is in
"safe" mode until it is ready for use. Turn dial to unlock
("12" and "6" position) to release spray gun trigger.
Note: The trigger lock prevents trigger from being
accidentally engaged.
2
3
N
K
Locked
7
K
3
N
2
Twist collar then pull back to release the the high
pressure hose (N) connection from the gun (K).
9
I
Extension Lance Installation
While spray gun (K) is in the locked position, insert
lance (I) into the end of spray gun by inserting and turn-
ing clockwise until fully in place. To remove, turn coun-
terclockwise.
1
3
N
K
9
Publicidad
