ClearSounds A300E Serie Manual De Uso página 13

3-Way Conference Calling
You can set up a 3-way conference call with an external call
and a handset that is registered to the base.
1. During an external call, press
key and then the destination handset number that you
would like to join the 3-way conference call.
2. The destination handset should press
3. Press
4. Either of the two internal handsets can press
leave the conference call at any time. If one of the
handsets drops the call, the remaining handsets will
continue the conference.
TROUBLESHOOTING
No dial tone
1. Check that all phone cord connections and AC adapter are
securely plugged into the phone, wall jack and electric outlet
of the main base.
2. Check that the AC adapter is securely plugged into the A300E
base and electric outlet.
3. Check that the handset batteries are installed properly and
are in full power (pages 6-7).
4. Check that the handset has been properly registered to the
main base (page 8).
5. Check that the phone is in the correct dialing mode: tone or
pulse.
6. Plug another phone into the wall jack to make sure your
phone service is working.
Nothing appears on the display
1. Check that the handset batteries are installed properly and are
in full power.
2. Check that the handset has been turned on (page 9).
to start the 3-way conference call.
13 – ENGLISH
on the navigation
to answer.
to