Descargar Imprimir esta página

Onkyo TX-RZ620 Manual Básico página 19

Publicidad

Idiomas disponibles

Idiomas disponibles

> Before Start
> Part Names
Turntable
a Digital optical cable, b Analog audio cable
> Install
> Initial Setup
a
OR
b
> Playback
4. Connect the Audio Component
Example of a connection with an audio component.
Connect a CD player using a digital optical cable or analog
audio cable. You can also connect a turntable that has an
MM-type cartridge to the PHONO jack.
0 If the turntable has a built-in audio equalizer, connect it to
another AUDIO IN jack. Further, if the turntable uses an
MC type cartridge, install an audio equalizer compatible
with the MC type cartridge between the unit and the
turntable, then connect to any AUDIO IN jack other than
the PHONO jack.
If the turntable has a ground wire,
connect it to the GND terminal of this unit.
CD
En
19

Publicidad

loading