Publicidad
Idiomas disponibles
Idiomas disponibles
Inspection Chart
NOTE: Disassemble crane including ratchet jack, boom, and winch periodically to inspect each for damage.
Use the following chart to determine what type of inspection is necessary. Frequent Inspection (F) and
Periodic Inspection (P).
Location
Crane
Foundation
Fasteners
(including moutning fasteners)
Handle
NOTE: Please refer to the winch owner's manual for the winch inspection chart.
Repairs
All repairs must have factory authorization. Contact OZ Lifting Products LLC
year limited warranty and potential damage.
Perform recommended inspections to identify which parts should be replaced. Only use OZ Lifting Products
®
LLC
replacement parts. To order replacement parts, contact your local OZ Lifting Products LLC
Please have the serial number, part number and a description available when calling.
Check For
Damage, cracks, rust, chipping, dents excess wear, or corrosion.
Unusual sounds
Smooth load movements
Equipment properly lubricated
Signs of overloading (cracks, dents, or damage)
Proper function when operated with a load equal to the load rating
Good condition/supports the crane under all conditions
Level, no swerving of boom
Cracks, corrosion, damage (check by removing crane base from foundation)
Firmly installed
Properly tightened
Stripped threads, bent, or damage (check by removing crane from foundation)
Rotates freely in both directions
EN pg.13
®
to prevent voiding of the one-
®
F
P
X
X
X
X
X
X
X
X
X
X
X
X
X
dealer.
Publicidad
