Panasonic ES-WL80 Instrucciones De Funcionamiento página 15

Storing
Attach the cap.
• Do not leave the shaver in a place with high temperature and
high humidity. Doing so may cause malfunction.
Replacing shaving head components
Replacing the outer foil
1. Press the outer foil frame release buttons to remove the outer
foil frame. (Fig. 13)
2. Hold the knobs on the outer foil with your fi nger. Lift it up in the
direction of the arrow while pushing the edge of outer foil from
the outside. (Fig. 14)
3. Align the directions of knobs as illustrated and insert the new
outer foil into the frame. (Fig. 14)
4. Insert the plastic edges into the frame until they click.
Replacing the inner blades (Fig. 15)
1. Hold the inner blade at both ends fi rmly and pull it straight away
from the shaver to remove one by one.
2. Insert the new inner blade one by one by holding it at both ends
and press it downward until it clicks.
Troubleshooting
The appliance does not operate.
• Fully charge the appliance.
• If the appliance and the AC adaptor are connected to the
household outlet, disconnect from the household outlet before
use.
• Perform wet-cleaning. (See page 14.)
The usage time gets short.
• Fully charge the appliance.
• Use the appliance in an ambient temperature approximately 0 °C
(32 °F) or higher.
• Contact to skin with gentle force.
15