Danby Designer DAR110A1TDD Manual Del Propietário página 5

OPERATING INSTRUCTIONS
TEMPERATURE SELECTION
The temperature of the appliance can be adjusted by
turning the thermostat dial on inner right side of the
cabinet.
• The number 1 is the warmest setting. Higher
numbers indicate colder settings.
• The MAX position is the coldest setting.
• The "Off" position will turn off the cooling function.
Internal temperature of the appliance can vary based
on ambient temperature, the quantity of items stored
and how frequently the door is opened.
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any
length of time during this process, it must be allowed
to remain upright for 6 hours before plugging it in to
avoid damage to the internal components.
1. Remove the adjustable foot from the lower left
side of the cabinet. Remove the adjustable foot
and lower hinge from the lower right side of the
cabinet.
2. Remove the door from the cabinet. Remove the
hole cover from the top left side of the door and
install it in the hole on the top right side of the
door.
3. Remove the hinge pin from the top right side of
the worktop and install it on the top left side of the
worktop.
4. Install the door on the cabinet. Install the adjustable
foot on the lower right side of the cabinet. Install
the adjustable foot and lower hinge on the lower
left side of the cabinet. Ensure that the top of the
door is level with the top of the cabinet and that
the rubber gasket is making good contact before
tightening the lower hinge screws.
1
2
3
4
4