Publicidad
Technical data
Code
Description
Net Weight (without bar)
Bar Length
Chain Pitch
Chain Gauge
Drive Sprocket Wheel
Motor Cylinder Capacity
Motor Rated Power
Maximum Motor Speed
Chain Speed
Fuel Tank
Oil Tank
Vibration
Work Cycle
Fuel requirements
• The chainsaw is built with an air-cooled, 2-stroke motor using unleaded gasoline high quality self-mixing oil with fuel stabilizer
specified for air-cooled 2-stroke motor.
• The motor is certified to function with unleaded gasoline for vehicles with an 87 ([R+M]) octane-rating or higher.
• Do not use any type of pre-mixed gasoline with oil purchased in gas stations, like the one fit for motorcycles.
• DO NOT use automotive oil, nor outboard 2-stroke motor oil.
• The mix ratio shall be 50 parts gasoline per 1 part oil (ratio 50:1). Prepare the mix in a gasoline approved container. Always
mix thoroughly before pouring in the motor tank.
Do not use fuel mix that has been stored more than 15 days. Mix only small amounts.
CAUTION
Never smoke near fuel or the area where gasoline is being filled up nor where the mix with
WARNING
oil is being prepared or when operating the chain saw.
Use the cap of
the mix. Mix 4 capfuls oil with each liter gasoline.
1
L
1 liter
Gasoline
To make the useful life of the motor las longer use
* 1 gallon = 3,78 liters
MOT-6020P
27045
15,2 lb
20"
40 minutes rest per each tank consumed.
oils ** ACES-2, ACES-5 or ACES-20 as a measure to prepare
A wrong mix can cause the machine to throw-a-rod,
causing costly repairs!
+
4 capfuls oil
** Not included
MOT-6018P
Chain Saw
0.325"
0.05"
with 7 (0,325") sprockets
60 cc
3 HP
12500 RPM
4 330.7 ft/min
19.95 oz
8.79 oz
front handle 3.5 m/s
2
rear handle 7.7 m/s
2
Maximum 5 hours daily.
=
proportion
50:1
synthetic oil for 2-stroke motors.
27044
14,7 lb
18"
Mix
3
ENGLISH
ENGLISH
Publicidad
