SPORTSTECH HGX250 Manual De Usuario página 57

STEP 16
A Attach the 3250 mm Upper cable (39#) through the opening of the upper frame , Make sure the ball stopper should be in
front of the upper frame, Place 1PC Pulley (74#) below the cable and secure the 1st pulley using 1PC M10 × 45 Allen bolt
(94#) ,2PC ø10 washer (105#) and 1pc M10 Aircraft nut (103#).
B Draw the cable backwards and place the 2st pulley below the cable , Secure the pulley with the same way in A.
C Draw the cable around the pulley and front , Place the 3st pulley below the cable and secure it with 1PC M10×160 Allen bolt
(100#), 2PC ø10 washer (105#) and 1pc M10 Aircraft nut (103#).
D Draw the cable around the pulley and backwards,Place the 4st pulley below the cable and secure it with the same way in A.
E Draw the cable around the pulley and downwards,Place the 5st pulley below the cable, Secure the pulley with 1pc M10*50
Allen bolt(95#), 2PC ø10 washer (105#) ,2pcs bushing (44#),double floating pulley bracket (30#),and 1pc M10 Aircraft nut
(103#).
F Draw the cable around the pulley and upwards ,Place the 6st pulley below the cable and secure it with 1pc M10*65 Allen bolt
(93#),2pcs bushing (41#) and 1 pc M10 Aircraft nut(103#).
G Draw the cable around the pulley and downwards,Thread the end of the upper cable to the top opening of the selector rod at
least 5 laps to keep safe.
EN
105
3250
3250
57