Publicidad
Enlaces rápidos
Models / Modelos / Modèles
U1010-PK, U1011-PK,
U1072-PK, U1075-PK
Series / Serie / Séries
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
Register Online
Regístrese en línea
S'enregistrer en ligne
www.deltafaucet.com/registerme
A.
B.
C.
D.
Application A - Fits 3/4" Thread:
Wrap the 3/4" thread at the wall several times with plumber's tape (3). Screw the 3/4" adapter (5) onto the 3/4" pipe at the wall until flush with the wall.
Wrap the male end of the 3/4" adapter (5) several times with plumber's tape. Screw the tub spout onto the 3/4" pipe at the wall until flush with the wall
and with spout opening facing downward.
Application B - Fits 1/2" Thread:
Place rubber washer (7) into 3/4" adapter (5). Thread the reducer bushing adapter (1) into the 3/4" adapter (5). Follow the same directions for Application A.
Application C - Fits 1/2" Pipe:
Slip fit for 1/2" copper or PVC pipe. Do not cut the pipe. Make sure pipe is free from burrs and sharp edges by filing or sanding with smooth emery paper.
Slide the slip fit adapter (2) over the pipe (threaded end out). Leave a 1/8" (3mm) gap between the adapter and the wall. Using the allen wrench (4) tight-
en the allen screw located in the slip adapter (2) clockwise until tight- do not overtighten- this may damage the pipe. Wrap the slip fit adapter 4 full times
with plumber's tape. Using a hack saw or other fine toothed saw or knife, cut the 3/4" adapter (5) at the space between the threads (6) as straight as pos-
sible ( hold in a vise if possible). Slide the 3/4" adapter (5) over the pipe and thread it onto the slip fit adapter until snug. Cut the pipe if it protrudes from
the male end of the 3/4" adapter (5). Wrap the male end of the 3/4" adapter (5) with plumber's tape and screw onto the tub spout until flush with the wall
and facing downward.
06/21/2022
(4)
A
(1)
A
(7)
A
(2)
A
UNIVERSAL SPOUT
PICO UNIVERSAL
BEC UNIVERSEL
You may need:
Usted puede necesitar:
Articles dont vous pouvez avoir besoin :
(5)
(6)
(3)
1
A.
A= 5/16"~11/16" (7.6mm~17.8mm)
B.
A= 1/2"~11/16" (12.7mm~17.8mm)
A= 1 15/16"~2 15/16"
C.
(48mm~73.6mm)
D.
A= 2 15/16" (73.6mm)
U1010L Rev. F
Publicidad
Manuales relacionados para Delta U1010-PK
Resumen de contenidos para Delta U1010-PK
- Página 1 UNIVERSAL SPOUT PICO UNIVERSAL BEC UNIVERSEL Models / Modelos / Modèles U1010-PK, U1011-PK, U1072-PK, U1075-PK Series / Serie / Séries You may need: Usted puede necesitar: Articles dont vous pouvez avoir besoin : Write purchased model number here. Escriba aquí el número del modelo comprado.
- Página 2 Si es necesario, extremos de la manguera instalar un control de volumen por la empresa de grifos Delta o sin igual. Aplique un cordón flexible. Apriete la tuerca de becerro de baldosas de tina donde el pico se encuentra con la pared.
- Página 3 être nécessaire. Si nécessaire, des extrémités du tuyau installez un contrôle de volume par la compagnie de robinet delta ou peerless. Appliquer flexible. Serrez à la main une perle de carreaux de baignoire calk où le bec rencontre le mur.
- Página 4 Attention: Warranty Service St. Thomas, Ontario, Canada N5P 4L1 Delta seller by a purchaser who owns but does not live in the residential dwelling in which the faucet is initially installed, such as in a rented or www.deltafaucet.com/service-parts/contact-us Attention: Customer Service leased single unit or multi-unit detached home (duplex or townhome), or a condominium, apartment building or community living center.