Delta U1011-PK Instrucciones De Montaje

Models / Modelos / Modèles
U1010-PK, U1011-PK,
U1072-PK, U1075-PK
Series / Serie / Séries
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
Register Online
Regístrese en línea
S'enregistrer en ligne
www.deltafaucet.com/registerme
A.
B.
C.
D.
Application A - Fits 3/4" Thread:
Wrap the 3/4" thread at the wall several times with plumber's tape (3). Screw the 3/4" adapter (5) onto the 3/4" pipe at the wall until flush with the wall.
Wrap the male end of the 3/4" adapter (5) several times with plumber's tape. Screw the tub spout onto the 3/4" pipe at the wall until flush with the wall
and with spout opening facing downward.
Application B - Fits 1/2" Thread:
Place rubber washer (7) into 3/4" adapter (5). Thread the reducer bushing adapter (1) into the 3/4" adapter (5). Follow the same directions for Application A.
Application C - Fits 1/2" Pipe:
Slip fit for 1/2" copper or PVC pipe. Do not cut the pipe. Make sure pipe is free from burrs and sharp edges by filing or sanding with smooth emery paper.
Slide the slip fit adapter (2) over the pipe (threaded end out). Leave a 1/8" (3mm) gap between the adapter and the wall. Using the allen wrench (4) tight-
en the allen screw located in the slip adapter (2) clockwise until tight- do not overtighten- this may damage the pipe. Wrap the slip fit adapter 4 full times
with plumber's tape. Using a hack saw or other fine toothed saw or knife, cut the 3/4" adapter (5) at the space between the threads (6) as straight as pos-
sible ( hold in a vise if possible). Slide the 3/4" adapter (5) over the pipe and thread it onto the slip fit adapter until snug. Cut the pipe if it protrudes from
the male end of the 3/4" adapter (5). Wrap the male end of the 3/4" adapter (5) with plumber's tape and screw onto the tub spout until flush with the wall
and facing downward.
02/28/2023
(4)
A
(1)
A
(7)
A
(2)
A
UNIVERSAL SPOUT
PICO UNIVERSAL
BEC UNIVERSEL
You may need:
Usted puede necesitar:
Articles dont vous pouvez avoir besoin :
(5)
(6)
(3)
1
A. A= 5/16"~11/16" (7.6mm~17.8mm)
B. A= 1/2"~11/16" (12.7mm~17.8mm)
A= 1 15/16"~2 15/16"
C.
(48mm~73.6mm)
D. A= 2 15/16" (73.6mm)
U1010L Rev. G