Kohler K-T72790-9M-SN Guía De Instalación Y Cuidado página 2

Tools and Materials
Sealant Tape
Before You Begin
CAUTION: Risk of personal injury. Do not use the bath
filler as a grab bar or support bar when entering or exiting
the bath. The bath filler is not designed to support weight.
NOTICE: To avoid damage to the O-rings on the bottom of the
faucet, keep the faucet vertical and use care when installing the
faucet.
NOTE: A minimum operating pressure of 45 psi (310 kPa) is
required for proper operation. If a pressure of less than 45 psi (310
kPa) is present, contact a plumber or choose another faucet.
Observe all local plumbing and building codes.
Shut OFF the water supply.
To install this bath faucet with an overflowing bath, make sure
that the outer rim of the bath slightly overlaps the surround
framing. This will help ensure that the water stream from the
spout reaches into the bath basin area.
Installer supplied copper tubing must be 5/8" OD (1/2"
Nominal).
Carefully review this document and all appropriate roughing-in
information. Design the bath enclosure accordingly.
1311402-2-A
Plus:
• 3/16" Masonry Bit (for concrete installation)
• Conventional Woodworking Tools and Materials
• Plumbing Tools and Materials
2 Kohler Co.