Tripp-Lite SmartPro SMX1000RT2U Manual Del Propietário página 18

Battery Replacement
Under normal conditions, the original batteries in your UPS will last many years. See Safety section
before replacing batteries. The batteries are designed for hot-swap replacement (i.e., leaving the
UPS in ON mode), but some qualified service personnel may wish to put the UPS in the OFF mode
and disconnect equipment before proceeding.
Note: Refer to the label on the battery retention plate for the R.B.C. part number.
SMX1000RT2U Battery Replacement Procedure
1
Remove Front Panel
1
4 x screws
2
Remove Battery Retention Plate
4 x screws
2
20-10-127- 933184.indb 18 20-10-127- 933184.indb 18
3
Disconnect Batteries
3
4
Remove/Recycle Batteries
4
18
10/16/2020 11:04:38 AM 10/16/2020 11:04:38 AM