Descargar Imprimir esta página

Miele PFD 100 SmartBiz Instrucciones Breves De Manejo E Instalación página 41

Ocultar thumbs Ver también para PFD 100 SmartBiz:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 50
Risk of scalding due to hot wa-
ter.
During operation, water in the dish-
washer may be very hot.
During operation, only open the door
with extreme caution.
Risk of injury due to door open-
ing automatically.
The door may open automatically at
the end of a programme.
Keep the area around the door free
of obstructions.
Closing the door
 Push the baskets right in.
 Raise the door upwards until the
catch engages.
Risk of crushing due to the door
closing.
When closing the door, you are at
risk of shutting your fingers in it.
Do not put your hand inside the door
as it is closing.
en - Before using for the first time
Filling the salt reservoir
Only use special coarse grained reactiv-
ation salt with granules of approx. 1 -
4 mm. Do not use other types of salt
such as cooking salt, agricultural grade
or gritting salt. These may contain insol-
uble additives which can impair the
functioning of the water softener. If in
doubt consult the Miele Professional
Department.
Damage caused by using unsuit-
able salts.
Some types of salt may contain in-
soluble components which can
cause the water softener to malfunc-
tion.
Only use special coarse-grained
dishwasher salt or other pure kitchen
salt for reactivation.
Damage to the water softener
from detergent.
Detergent will damage the water
softener.
Do not fill the salt reservoir with
powder or liquid detergent.
Before filling the salt reservoir for the
first time, you must fill it with approx.
2 l of water to enable the salt to dis-
solve.
Once the dishwasher has been used
once, there is always sufficient water
in the salt reservoir.
 Remove the lower basket from the
wash cabinet and unscrew the salt
reservoir cap.
 Fill the salt reservoir with approx. 2 l
of water (first use only).
41

Publicidad

loading