Adjusting The Throttle Cable; Fitting The Harness - Stihl BR 800 X Manual De Instrucciones

English

Adjusting the Throttle Cable

It may be necessary to correct the
adjustment of the throttle cable after
assembling the machine or after a
prolonged period of operation.
Adjust the throttle cable only when the
unit is completely and properly
assembled.
Set the throttle trigger to the full
N
throttle position.
Carefully rotate the screw in the
N
throttle trigger in the direction of the
arrow until you feel initial resistance.
Then rotate it another half turn in the
same direction.
14

Fitting the Harness

Adjusting the Harness
A
B
A Pull the ends of the straps to tighten
the harness.
B Lift the tabs of the adjusters to
loosen the straps.
C
D
C Close the buckle by pushing the two
parts together.
D Squeeze the hooks to open the
buckle.
BR 800, BR 800 X