Stihl BR 800 X Manual De Instrucciones página 20

English
4
Move the shutter (4) to the right to
N
position r (winter operation).
Fit the filter cover (2) with air
N
filter (3) in position.
Insert the screws (1) and tighten
N
them down firmly.
At temperatures above 70°F (+20 °C)
Move the shutter (4) to the left to
N
position r (summer operation).
NOTICE
If the shutter (4) is not moved to
position s at temperatures above 70°F
(20°C), there is a risk of engine running
problems caused by overheating.
18
Information Before You Start
NOTICE
With the engine stopped, check the
following parts before starting and clean
if necessary:
Base plate
–
Intake screen between backplate
–
and engine
Positions of Setting Lever
1
2
1 Setting lever
2 Throttle trigger
Position "F"
Engine runs or is ready to start. Throttle
trigger (2) can be moved to any position.
Position "†"
Ignition is interrupted, engine stops. The
setting lever (1) is not locked in this
position. It springs back to position "F".
The ignition is switched on again.
Fixed throttle
1
2
The throttle trigger (2) can be locked in
any position.
To disengage the lock:
Return the setting lever (1) to
N
position "F".
BR 800, BR 800 X