Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY STEP 3
HArDWArE BAG 3 CONTENTS :
BOLT (B)
SPRING WASHER (C)
20 mm
15 mm
Qty: 4
Qty: 4
RUNNING
DECK
CONSOLE CABLE
BASE FRAME
8
T101-CT5.2-OM-rev1.2.indd 8-9
Open hardware bag 3.
A
Pull lead wire through right console
B
FLAT WASHER (D)
mast. After pulling the lead wire through the
15 mm
mast, the top of the console cable should
Qty: 4
be located at the top of the mast. Detach and
discard the lead wire.
C
With the running deck in the raised
LEAD WIRE
position, attach the right console
mast to the base frame using 4 bolts
(b), 4 spring washers (c) and 4 flat
washers (d).
RIGHT CONSOLE MAST
NOTE: Be careful not to pinch any wires
while assembling the right console mast.
BOLTS (B)
SPRING WASHERS (C)
FLAT WASHERS (D)
ASSEMBLY STEP 4
HArDWArE BAG 4 CONTENTS :
BOLT (E)
SPRING WASHER (C)
FLAT WASHER (D)
15 mm
15 mm
15 mm
Qty: 4
Qty: 4
Qty: 4
WATER BOTTLE POCKETS
CONSOLE CABLES
CONSOLE
FLAT WASHERS (D)
ASSEMBLE
SPRING WASHERS (C)
LEFT SIDE
FIRST
BOLTS (E)
CONSOLE MAST
A
Disengage the deck lock latch with your foot to
lower the running deck.
B
Open hardware bag 4.
C
gently place the console on top of the console
masts. Attach the left side first using 2
bolts (e), 2 spring washers (c) and 2 flat
washers (d).
D
Connect the console cables, carefully tucking
wires in masts to avoid damage.
E
Attach the right side of the console using 2
bolts (e), 2 spring washers (c) and 2 flat
washers (d).
NOTE: Be careful not to pinch any wires
while assembling the console.
F
Insert water bottle pockets into console.
g
Before the first use, lubricate the treadmill deck by
following the instructions in the MAINTENANCE
section in the TREADMILL gUIDE.
YOU ARE FINISHED!
7/19/10 4:16 PM
9
Publicidad
