Publicidad
Idiomas disponibles
Idiomas disponibles
Extended programming menu
Use the extended programming menu to configure all of the unit's parameters in order to adapt it to your installation
requirements. Press the SET key for 6 seconds to access it.
IMPORTANT: If the password function has been configured as a keypad lock (b10=2), or as an access
to parameters block (b10=1), you will be requested to enter the password programmed in PAS when
attempting to access either of the two functions. If the entered password is not correct, the unit will go
back to showing the temperature.
IMPORTANT: Certain parameters or menus may not be visible depending on the configuration of the
other parameters and the options chosen during set-up.
Menú de programación extendido
FUERA DE
PROGRAMACIÓN
20 seg.
Indicación
temperatura
6 seg.
20 seg.
Nivel 1
Nivel 2
OK
Menús
Parámetros
Cambiar
Parám..
Cambiar
menú
OK
28
3516526A41 Ed. 02
EN
PROGRAMACIÓN
Nivel 3
OK
Valores
Cambiar
valor
OK
OK
20 seg.
Publicidad
