Vaillant VR 92/2 Manual De Uso E Instalación página 24

2.6.2 INFORMATION menu item
MENU → INFORMATION
→ Current temperatures
→ Zone
→ Current room air humidity
→ Control elements
→ Menu introduction
→ Competent person contact info
→ Serial number
2.6.3 Menu item SETTINGS
MENU → SETTINGS
→ Installer level
→ Enter access
code
→ Fault history
→ Remote control
address:
→ Software version
→ Change code
→ Language, display
→ Language:
→ Display bright-
ness:
→ Dimmed displ.
brightness:
→ Offset
→ Room temperat-
ure: K
→ Factory settings
24
Explanation of the control elements
Explanation of the menu structure
Access to the installer level, factory setting: 00
If the access code is unknown, reset the remote control to the factory
setting.
Faults are listed in chronological order
Each remote control has a unique address, starting with Address 1.
For each additional remote control, the address increases continu-
ously.
Brightness during active use.
Brightness in standby.
Comparison of the temperature difference between the measured
value in the system control and the value for a reference thermometer
in the living room.
The system control resets all of the settings to the factory settings and
calls up the installation assistant.
Only the competent person can call up the installation assistant.
Operating and installation instructions 0020287935_01