4
-- Start-up
4.1 Running the installation
assistants
The installation assistant is at the Lan-
guage query.
The installation assistant guides you
through the required functions. For each
function, you should choose the set
value that is best suited to the heating
installation being installed.
Once you have gone through the installa-
tion assistant, You have completed the
installation assistant! appears on the
display
4.2 Configuring the settings on the
system control
1. In the Room temp. mod.: function,
select the value Active or Expanded
if you want to use the remote control's
room temperature sensor.
2. Specify the zone in which the remote
control has been installed.
3. Scroll through the display to the zone
in which the remote control has been
installed.
4. In the Zone assignment: function in
this zone, assign the address for the
remote control that should be triggered.
4.3 Changing the settings later
All settings that you have made via the in-
stallation assistant can be changed again
at a later date via the end user or installer
level.
0020287935_01 Operating and installation instructions
5 Fault and maintenance
messages
5.1 Fault messages
with the text of the fault message
appears in the display.
You can find fault messages under: MENU
→ SETTINGS → Installer level → Fault
history
Troubleshooting (→ sensoCOMFORT op-
erating and installation instructions, ap-
pendix)
5.2 Maintenance messages
with the text of the maintenance mes-
sage appears in the display.
Maintenance message for the end user (→
Appendix)
Maintenance message for the competent
person (→ sensoCOMFORT operating and
installation instructions, appendix)
6 Information about the
product
6.1 Observing and storing other
applicable documents
▶
Observe all of the instructions that are
intended for you and are enclosed with
the components of the installation.
▶
As the end user, keep these instructions
and all other applicable documents safe
for future use.
6.2 Validity of the instructions
These instructions apply only to:
– 0020260925
27