Product Safety Information
Intended Use:
These Air Ratchet Wrenches are designed to remove and install threaded fasteners.
For additional information refer to Air Ratchet Wrenches Product Safety Information Manual Form
04580361.
Manuals can be downloaded from www.irtools.com.
Product Specifications
Drive
Model(s)
Size
1200
3/8"
1210
1/2"
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain condensate from
valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a properly sized Safety Air Fuse
upstream of hose and use an anti-whip device across any hose coupling without internal shut-off, to prevent
hose whipping if a hose fails or coupling disconnects. See drawing 16571804-2 and table on page 2.
Maintenance frequency is shown in circular arrow and defined as h=hours, d=days, and m=months. Items
identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
6. Thread size
7. Coupling
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled, degreased and parts
be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll-Rand Office or Distributor.
Form 04585055-Edition 1
Free
Recommended
Speed
Torque Range
rpm
ft-lb (Nm)
275
10-50 (14-68)
275
10-50 (14-68)
8.
9.
10.
11.
12.
Sound Level dB (A)
(ISO15744)
Pressure (L
"K
"=3dB(A)
pA
94.7
94.7
Safety Air Fuse
Oil
Grease - Inject between ratchet housing and yoke to lubricate
drive bushing.
Grease - Disassemble ratchet head and lubricate
components.
Grease - Disassemble gearing and lubricate components.
)
Power (L
)
p
w
"K
"=3dB(A)
wA
105.7
105.7
Vibration
Level
(ISO8662)
m/s²
5.3
5.3
3