Dexter 330SHS3.5 Manual De Instrucciones página 159

Idiomas disponibles

5. BEFORE PUTTING THE EQUIPMENT INTO OPERATION

WARNING: Clean the air vents on your power tool regularly. The

motor's fan will draw the dust inside the housing and excessive

accumulation of powdered metal may cause electrical hazards.

NOTE: Hook and loop sanding base is not a warranty item.

Dust extraction

We recommend the use of the dust extraction facility at all times.

To install the dust extraction tube, aimed at the grooves on the dust extraction port and

then insert the tube into the port.

Rotate the tube clockwise for locking.

A dust extraction system or a suitable vacuum cleaner is allowed to be connected to the

tube for enhancing the dust e ciency

Dust extraction bag is also provided.

To install the dust extraction bag, aimed at the grooves on the dust extraction port and then

insert the bag into the port.

Rotate the dust extraction bag clockwise for locking.

For e cient operation, always empty the dust extraction bag

Always keep the dust extraction holes in the sanding base free of obstructions.

WARNING: Do not use the dust bag when sanding metal. The hot

metal particles could cause residual wood dust or the box itself to

catch re.

6. OPERATION

Selecting the speed

With the speed controller, the rate of oscillation can be selected (also during operation).

Rotate the speed controller to choose the suitable speed.

The optimum speed depends on the material and should be determined by carrying out a

practical test.

Stage 1: slow Stage 6: quick

159