GreenWorks LME455 Manual Del Operador página 9

7.3 INSTALL THE UPPER HANDLE
23
15
4
1. Align the holes in the upper handle (3) and the lower
handle (4).
2. Put the bolts (23) through the holes.
3. Tighten the knobs (15) onto the bolts.
4. Do the same operation on the other side.
7.4 INSTALL THE GRASS CATCHER
23
1. Remove the mulch plug.
2. Remove the side discharge chute.
3. Open the rear discharge door (5) and hold it.
4. Hold the the grass catcher (11) by its handle and engage
the hooks (23) on the door rod.
5. Close the rear discharge door.
English
3
23
15
5
11
7.5 INSTALL THE MULCH PLUG
1. Remove the grass catcher.
2. Open the rear discharge door (5) and hold it.
3. Hold the mulch plug (13) by its handle and fit it in the
discharge chute.
4. Close the rear discharge door.
7.6 INSTALL THE SIDE DISCHARGE
CHUTE
CAUTION
When you use the side discharge chute,
• Do not install the grass catcher.
• Keep the mulch plug installed.
1. Open the side discharge door (8) and hold it.
2. Line up the recesses of the side discharge chute (14)
below the pivot.
3. Close the side discharge door.
7.7 SET THE CUTTING HEIGHT
The machine can be set to different cutting heights.
9
EN
5
13
8
14