Descargar Imprimir esta página

GreenWorks ST40L02 Manual Del Operador página 12

Ocultar thumbs Ver también para ST40L02:

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
10.6
REMOVE THE TRIMMER HEAD
1. Put the metal rod (1) in the specified angle transmission
hole to fix the trimmer head.
2. Turn the trimmer head clockwise to loosen it. Do not
remove the spacer from the shaft.
English
11
Remove the battery pack from the machine before
tranportation and storage.
11.1
When you move the machine, you must:
Wear gloves.
Stop the machine.
Remove the battery pack.
11.2
Remove the battery pack from the machine.
Make sure that children cannot come near the machine.
Keep the machine away from corrosive agents such as
garden chemicals and de-icing salts.
1
Secure the machine during transportion to prevent
damage or injury. Clean and examine the machine for any
damage.
12
Problem
The ma-
chine does
not start
when you
push the
trigger.
12
TRANSPORTATION AND
STORAGE
WARNING
MOVE THE MACHINE
STORE THE MACHINE
TROUBLESHOOTING
Possible Cause
Solution
No electrical con-
1. Remove battery pack.
tact between the
2. Check contact and in-
machine and the
stall the battery pack
battery pack.
again.
The battery pack is
Charge the battery pack.
depleted.
The lock-out but-
1. Pull the lock-out but-
ton and trigger are
ton and hold it.
not pushed at the
2. Pull the trigger to start
same time.
the machine.

Publicidad

loading

Este manual también es adecuado para:

Stf456