Publicidad
Idiomas disponibles
Idiomas disponibles
To Configure Zone Name and Timer
The Smart Module that is supplied with the Colorfalls has a single zone with a timer function to
turn the zone on and off at set times. Click dropdown menu. Edit the name of "Zone 1" on the
"Zone Settings" page. This zone name will be visible throughout the app. Click the "Save" button
to save changes. A box will come up confirming the settings have been saved. Click the "Back"
button once configuration is complete.
Color Tab
Use the Color tab to choose colors using either the color picker or the red, green and blue sliders
at the bottom. Choose the brightness of the color by adjusting the slider.
Favorites Tab
The Favorites tab stores preset color changing sequences. Select the zone, choose a sequence
of colors, then choose the transition between them, the speed of the sequence and the
brightness. The Edit button deletes stored Favorites you have created.
Custom tab
The Custom tab creates and stores custom color changing sequences. Move the red, green and
blue sliders to choose a color, or select it from the color picker. Once you have decided on the
color, click the "Plus" button to add it to the sequence. Repeat as desired. Add up to 10 colors
to a sequence. Once the sequence has been created it can be named and saved. The saved
sequence will be available on the Favorites page.
Maintenance
Atlantic's Color Changing Colorfalls has a removable back plate for easy cleaning of the
interior of the spillway. To clean the interior of the spillway, simply remove the screws on
the back plate and remove the baffle (Figure 4). Remove any large obstructions that may
be present and wipe down the interior with a non-abrasive cloth. Once finished, install the
baffle and re-attach the back plate, making sure that the gasket is in place to ensure a
water-tight seal.
Caution: Be extremely cautious when tightening the screws. It is strongly recommended
that you tighten the screws with a hand held screwdriver. Overtightening the screws could
crack the back plate or strip the screw holes. The screws need only be snug for the gasket
to make a seal.
Atlantic Color Changing Colorfalls are self-draining for easy winterization. When the pump
is turned off the water inside the Colorfalls will drain back through the supply line. Ensure
that the supply line is fully drained. Remove the pump and store it indoors for the winter.
If the Colorfalls is installed with an Atlantic Formal Spillway Basin, please refer to the Basin
instructions for proper basin winterization.
5
Publicidad
