STERWINS EGT2-28.31 Manual De Instrucciones página 231

so that debris is thrown away from you.
q) Maintain a correct working posture (Correct normal position refer
to assembly manual P.12-P.14). The operator must take a break and
change working position after working for a long period. Keep a firm
footing and balance during operation; the harness must be used if it is
provided.
r) Never replace the non-metallic cutting means with metallic cutting
means.
s) Warning! Never touch moving hazardous parts before the machine is
disconnected from the mains and the moving hazardous parts have
come to a complete stop.
t) Never connect a damaged cord to the supply or touch a damaged cord
before it is disconnected from the supply for the reason that damaged
cords can lead to contact with live parts.
Maintenance and storage
a) Disconnect the machine from the power supply (i.e. remove the plug
from the mains, remove the disabling device or removable battery)
before carrying out maintenance or cleaning work.
b)Use only the manufacturer´s recommended replacement parts and
accessories.
c) Inspect and maintain the machine regularly. Have the machine repaired
only by an authorized repairer.
d)When not in use, store the machine out of the reach of children.
Recommendation
The machine should be supplied via a residual current device
(RCD) with a tripping current of not more than 30 mA.
2. SAFETY INSTRUCTIONS
231
EN