Check to make sure that all these parts were included in your packaging:
Faceplate & Gasket *
Temperature Limit Stop
* Actual product may vary in appearance depending on the model.
For safe operation, please observe the following:
Recommended operating pressure:
Minimum pressure.........20 psi (0.14 MPA), dynamic
Maximum pressure........80 psi (0.55 MPA), static
Do not solder connections directly to valve as damage to internal
components may occur.
Do not use the product at an ambient temperature below 32°F (0°C).
Your new trim is designed for years of trouble-free performance. Keep it
looking new by cleaning it periodically with mild soap, rinsing thoroughly
with warm water and drying with a clean, soft cloth. Do not use abrasive
cleaners, steel wool or harsh chemicals, as these will dull the finish. Failure to
follow these instructions may void your warranty.
INCLUDED PARTS
Escutcheon & Gasket
Set Screw & Hex Wrench
WARNINGS
CARE & CLEANING
3
Control Knob *
REQUIRED - NOT
INCLUDED
Valve with Plaster Guard
TSST