Descargar Imprimir esta página

WMB TE-071B Manual De Instrucciones página 14

Publicidad

Idiomas disponibles

Idiomas disponibles

Operating instructions
4. Operation.
4.1 - In order to place the elevator tower in
their working location, put the tower leaned in
their transport wheels (T) on a hard and level
surface.
4.2 - Get on the legs (P) of their support for the
transport (S) and insert them in their working
lodging (V) verifying that they are tightly
fastened by the safety catches (R).
4.3 - Adjust the vertical position of the tower by
means of the disc feet supports (Q) rotating
the hand crank (H) in the necessary direction
to manage that the bubble of the spirit level (F)
stays centred in the circle.
4.4 - Release the profiles turning the retention
crank nob PR. Put the load on top of the tower
using the suitable support, in order to make
work the weight of the load only in the vertical
direction. The minimum load must be 25 Kg.
The load will be automatically locked in any
position.
4.5 - Lifting:
Elevate the tower rotating the hand crank
of the winch (W) clockwise (N
up to desired height.
VMB ESPAÑOLA, S.A.
), lifting the load
1
v10.07 - Depósito legal y Copyright 2009. Todos los derechos reservados.
ENGLISH
4.6 - Lowering:
When lowering the towerlift you must lift
the load some cm until the ALS lock becomes
free. Then pull up the locking pin on the ALS
safety catch (M1) and rotate the hand crank of
the winch counterclockwise (N
load until the profile is completely folded.
Repeat the above process to each section
until all are completely lowered.
Pull up the locking pin on the ALS safety catch
(M2) and continue lowering the tower until this
second profile is completely folded.
Pull up the locking pin on the ALS safety catch
(M3) and continue lowering the load until the
towerlift is completely folded down to its
minimum height.
The towerlift can be left in any
intermediate position which would be
necessary.
4.7 - To transport the lift you must lower all the
profiles completely, locking them with the
retention crank nob PR. Get out the legs
lifting the blockade on the catches and put
them in their transport lodging (S).
) lowering the
2

Publicidad

loading

Este manual también es adecuado para:

Te-071 serieTe-071s