GreenWorks Pro GPW 2003 Manual Del Propietário página 12

ASSEMBLY
ASSEMBLING THE WHEELS
• Insert an axle (A) through a wheel (I), the axle sleeve (M), the frame of the unit, and then a
washer (J).
• Insert a cotter pin (K) through the hole in the axle to secure. Repeat for second wheel.
A
ASSEMBLING THE POWER CORD STORAGE
• Line up the screw with the holes in power cord storage and the upper handle.
• Push the screw through and tighten it.
See Figure 3.
K
J
M
I
12
See Figure 4.
Fig. 4
A
Fig. 3