Philips AVENT SCD833 Manual Del Usuario página 19

1
20°C
1
20°C
1
20°C
Belt clip
2 Press the top or bottom part of the control button to select the desired
sensitivity level.
If your baby only makes soft sounds, the sensitivity of the baby unit
needs to be set to a high sensitivity level on the parent unit.
The louder your baby sounds, the lower the sensitivity can be set on the
parent unit.
Note: In AUDIO and VIDEO mode, you will have continuous sound when
the sensitivity level is on 'very high'. Otherwise, low sounds will be muted.
Tip: The sensitivity level can be adjusted so you will always hear your
baby without the disruption of other sounds. When there is a lot of
background noise, turn the sensitivity lower so you will not hear these
sounds through the parent unit.
You can take the parent unit with you inside and outside the house by
attaching the parent unit to your belt or waistband with the belt clip. This
allows you to monitor your baby while you are moving around.
Note: The display is now turned upside down, which allows you to see
your baby on the screen by simply lifting up the parent unit.
19
English