GE FUM14 Manual Del Propietario Y Instalación página 11

Plastic Hinge
Cover
Hinge
Screws
Top Hinge
(on some models)
To Remove the Freezer Door
1 Remove the plastic hinge cover by either
lifting it off or folding it back (depending
on model).
Remove the screws holding the hinge
2
to the top of the cabinet using a
screwdriver, 5/16" socket driver or wrench
(depending on model).
Remove the top hinge from the cabinet
3
and lift the door up and off the lower
hinge pin. Set the door aside.
4 Remove the two screws from the bottom
hinge.
To Remove the Freezer Door
The hinge screws are tamperproof.
Please have an authorized service
technician remove the door.
Lid Removal
(on Chest models)
See lid removal instructions on either the
back of the cabinet or the hinge label.
(on Non-Electronic Control Upright models)
To replace the doors, reverse the order of the
above instructions.
CAUTION: It is very important that all hinge
screws are securely tightened to ensure a
secure assembly and prevent hinge slippage.
(on Electronic Control Upright models)
ge.com
11