Beurer 95261 Instrucciones De Uso página 37

7.12 Selecting the frequency
The baby unit can either transmit to the parent unit at 50 Hz or 60 Hz� The
frequency which is most common in Europe (50 Hz) has been preset� Choos-
ing the correct frequency can help to reduce screen flickering with artificial
lighting�
To change the frequency, proceed as follows:
• Press the (
• Use the direction buttons (
• Use the direction buttons (
( 50 Hz or 60 Hz )� Confirm using the ( OK ) button�
7.13 Energy-saving mode
The parent unit has an energy-saving mode� When you activate the ener-
gy-saving mode, the screen switches off automatically, either after 2, 5 or
10 minutes, as desired�
To set the energy-saving mode, proceed as follows:
• Press the (
• Use the direction buttons (
• Use the direction buttons (
which the parent unit will automatically switch to energy-saving mode
( 2, 5 or 10 minutes )� Confirm using the ( OK ) button�
7.14 Selecting the temperature unit
You can set the device to display the room temperature in degrees Celsius
(°C) or degrees Fahrenheit (°F)�
To set the temperature unit, proceed as follows:
• Press the (
• Use the direction buttons (
• Use the direction buttons (
unit ( °C or °F )�
• Confirm using the ( OK ) button�
) button�
) button�
) button�
) / ( ) to select menu item
) / ( ) to select your desired frequency
) / ( ) to select menu item
) / ( ) to select your desired duration, after
) / ( ) to select menu item
) / ( ) to select your desired temperature
37
�
�
�