10. Accessories and replacement parts
For replacement parts and additional items visit www�beurer�com or con-
tact the corresponding service address in your country (according to the
service address list)�
Replacement parts and additional items are also available from retailers�
Replacement parts and additional items
BY 110 single camera
11. What if there are problems?
Parent unit will not switch
on�
An acoustic signal sounds
from the parent unit�
The parent unit is
switched on, but no
sounds can be heard�
The parent unit switches
itself off�
Check whether
• the mains part plug is properly plugged in,
• the battery is correctly inserted,
• the battery is full, needs charging or is dam-
aged�
Check whether
• the maximum range has been exceeded,
• the mains part plug for the camera is correct-
ly connected,
• the camera is switched on,
• the parent unit battery needs charging�
• To set your desired volume on the parent unit,
press the ( – ) or ( + ) button on the side during
operation�
• Recharge the parent unit battery�
• It could be that the parent unit is in ener-
gy-saving mode� Check whether the ener-
gy-saving mode has been selected in the
menu and deactivate it if necessary�
40
Item number
952�63