Publicidad
Idiomas disponibles
Idiomas disponibles
Motor
Housing
Figure 9
Attaching the Fan Blades
Step 1. Insert the blade through the slot in the
blade holder. Align the holes in the blade and the
fan blade holder and secure with a the screw and
Studs
fiber washer. (Fig. 10)
Step 2. Tighten each screw securely starting with
the center screw. Make sure the blade is straight.
Repeat steps for the remaining blades.
Step 3. Fasten the blade holder assemblies to the
motor by tighten the five screws with lock washers
provided. (Fig. 11)
WARNING:
PERSONAL INJURY, DO NOT BEND THE BLADE
ARMS WHILE INSTALLING, BALANCING THE
BLADES, OR CLEANING THE FAN. DO NO INSERT
FOREIGN OBJECTS BETWEEN ROTATING FAN
BLADES.
TO REDUCE THE RISK OF
Blade holder
Figure 10
Blade holder
assembly
Screws with
lock washers
Figure 11
Screws with
fiber washers
Blade
Motor
6.
Publicidad
