Powerworks PD24IW400 Manual Del Operario página 5

4.4 SPEED SELECTION
Push the button (1) to adjust the speed. The lights (2) will
illuminate according to the speed level.
Figure 5.
Lights Speed level
3 Green Lights The machine is in "high speed" setting.
The machine is in "medium speed" set-
2 Green Lights
ting.
1 Green Light The machine is in "low speed" setting.
4.5 ADJUST THE REVERSING
BUTTON
The machine has the reversing button (forward/reverse lock)
above the switch trigger to chang the direction of the bit.
Figure 6.
1. When the reversing button is on the left side of the switch
trigger, the bit direciton is forward.
2. When the reversing button is on the right side of the
switch trigger, the bit direction is reversible.
3. Put the direction button in the OFF (center lock) position
to help decrease the possibility of accidental start when
not operate.
WARNING
Release the switch trigger and let the chuck to come to a
complete stop to stop the mahcine.
WARNING
Let the chuck to come to a complete stop before changing
the direction of rotation.
The machine does not operate until the direction button is
pushed fully to the left or right.
5 MAINTENANCE
CAUTION
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
CAUTION
Do not use strong solvents or detergents on the plastic
housing or components.
WARNING
Remove the battery pack from the machine before
maintenance.
NOTE
English
5.1 CLEAN THE MACHINE
The machine must be dry. Humidity can cause risks of
electrical shocks.
• Clear the unwanted material out of the air vent with a
vacuum cleaner.
• Do not spray the air vent or put the air vent in solvents.
• Clean the housing and the plastic components with a
moist and soft cloth.
6 TECHNICAL DATA
Rated Voltage
No Load Speed
Impact rate
Max torque
Weight with battery
Battery model
Charger model
Measuered sound pressure
level
Measured sound power level 95.3 dB(A), K
Vibration level
The recommended ambient temperature range:
Item
Appliance storage tempera-
ture range
Appliance operation temper-
ature range
Battery charging temperature
range
Charger operation tempera-
ture range
Battery storage temperature
range
Battery discharging tempera-
ture range
7 WARRANTY
(The full warranty terms and conditions can be found on
Powerworks webpage)
The Powerworks warranty is 3 years on the product, and 2
years on batteries (consumer/private usage) from the date of
5
CAUTION
24 V
-1
0 - 2800 min
-1
0 - 4000 min
400 Nm
1.19 kg
P2448B2/P2448B4/P2448B6
and other BAM series
P2448C and other CAM ser-
ies
84.3dB(A), K = 3 dB(A)
pA
= 3 dB(A)
wA
2
9.2 m/s , K = 1.5 m/s
Temperature
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
39°F (4°C) - 104°F (40°C)
39°F (4°C) - 104°F (40°C)
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
EN
2