Descargar Imprimir esta página

JVC KD-X482DBT Manual De Instrucciones página 28

Ocultar thumbs Ver también para KD-X482DBT:

Publicidad

Idiomas disponibles

Idiomas disponibles

Bluetooth®
After pairing is done successfully, "PAIRING OK"
and Bluetooth compatibility check starts.
If "CONNECT NOW USING PHONE" appears, operate the Bluetooth device to
allow phonebook access to continue.
"TESTING" flashes on the display.
The connectivity result flashes on the display.
"PAIRING OK" and/or "HANDS-FREE OK"*1 and/or "AUD.STREAM OK"*2 and/
or "PBAP OK"*3: Compatible
*1 Compatible with Hands-Free Profile (HFP)
*2 Compatible with Advanced Audio Distribution Profile (A2DP)
*3 Compatible with Phonebook Access Profile (PBAP)
After 30 seconds, "PAIRING DELETED" appears to indicate that pairing has
been deleted, and the unit exits check mode.
• To cancel, press and hold B SRC to turn off the power, then turn on the
power again.
20
ENGLISH
"Device Name" appears
Bluetooth — Audio
• Operations and display indications may differ according to their availability
• Depending on the connected device, some features may not work with
While in BT AUDIO source, you can connect to five Bluetooth audio devices
and switch between these five devices.
1
2
on the connected device.
your device.
Listen to the audio player via Bluetooth
Press B SRC repeatedly to select BT AUDIO.
Operate the audio player via Bluetooth to start playback.
To
Play back/pause
Select group or folder
Reverse skip/Forward skip
Reverse/Fast-forward
Repeat play
On the faceplate
Press the volume knob.
Press 2 J / 1 K.
Press S / T.
Press and hold S / T.
Press 4 B repeatedly.
[TRACK REPEAT], [ALL REPEAT], [GROUP REPEAT],
[REPEAT OFF]

Publicidad

loading