Important - Garland MONTANA 110J-V16 Manual De Instrucciones

English
2.4. SAFETY IN THE USE OF FUELS
IMPORTANT: The fuel used for the
chainsaw is highly flammable. If the fuel
or the machine ignite, smother the fire with a dry
powder fire extinguisher. Always avoid eye contact
with gasoline or oil.
If gasoline or oil comes in contact with your eyes,
rinse immediately with clean water. If your eye still
feels irritated later on, immediately consult with a
doctor.
Do not smoke while handling Fuel or fill
deposits, nor bring any flame or hot object
toward the fuel.
When you are refilling the fuel, make sure
you have turned the machine off and make
sure that the engine is cold. Never refuel
with the motor running or hot. In the event of a fuel
leak be sure to remove these leaks completely before
restarting.
Do not refuel in enclosed spaces, in poorly
ventilated areas or near flames.
Always store fuel in approved containers that comply
with the European standard.
2.5. CARE AND USE OF THIS MACHINE
Use to cut wood only. Do not use the chainsaw for any
other purposes. For example: do not use chainsaw for
cutting plastic materials, bricks or non-wood building
materials. The use of the chainsaw for operations
other than those designed may result in dangerous
situations.
Carefully follow the operating instructions contained
in this manual. Failure to follow the instructions
contained in this manual may cause a dangerous
situation.
Use this machine, accessories, tools, etc. in
accordance with these instructions and as planned,
taking into account the work conditions and work yet
to develop. The use of this machine any other use
apart from the designed applications may cause a
dangerous situation.
The manufacturer shall not be responsible for damage
caused by improper or incorrect use of this machine.
Do not force this machine. Use this machine for the
correct application. Using the machine for the type
of work to be done will allow you to work better and
more safely.
Do not use this machine if the switch does not change
between "open" and "closed". Any machine that
cannot be controlled with the switch is dangerous and
must be repaired.
Keep proper maintenance of this machine. Check that
the moving parts are not misaligned or locked, broken
parts or other conditions that may affect the operation
of this machine.
If this machine is damaged, repair fully before use.
Many accidents are caused by poorly maintained
machines.
Keep cutting instruments clean and sharp. Maintaining
the cutting tools correctly with sharp cutting edges is
less likely to bind and is easier to control.
Keep the machine's handles dry and clean. Greasy or
oily handles are slippery and cause loss of control of
the machine.
38/160